To Next PageTo Next Page
Need help?Do you have a question about the MTD 12A-997A795 and is the answer not in the manual?
General| Brand | MTD |
|---|---|
| Model | 12A-997A795 |
| Category | Lawn Mower |
| Language | English |
Read, understand, and follow all instructions on the machine and in the manual before operation.
Operation on slopes requires extra caution to prevent slip and fall accidents.
Keep children out of the mowing area and be alert to their presence.
Read and follow instructions for safe handling of gasoline and general service.
How to remove the mower unit from its shipping carton and packing material.
Identify each piece of the hardware pack as shown in the illustration.
Disconnect the spark plug wire before setting up the lawn mower.
Instructions for setting up the lawn mower, including handle assembly.
How to attach the starter rope to the lawn mower assembly.
Instructions for attaching the grass bag and its adapter for bagging clippings.
How to attach the side discharge chute to the mower unit.
Location and function of the blade control handle for operating the unit.
Location of levers used to adjust the cutting height of the mower.
Location and operation of the recoil starter for starting the unit.
Location and function of the drive clutch control for engaging the drive system.
Location and purpose of the shift lever for selecting forward speed.
Use of the mulching plug for recirculating grass clippings back to the lawn.
Instructions for checking and adding engine oil and servicing with gasoline.
Steps to take before starting the mower, including spark plug connection and drive clutch test.
Procedure to test and ensure proper drive clutch operation before starting.
Step-by-step guide for starting the lawn mower engine.
How to properly stop the engine and blade of the lawn mower.
Tips for optimal mowing results, including cutting wet or thick grass.
Instructions on how to adjust the handle height of the lawn mower.
How to adjust the rear cutting height of the mower using the adjustment lever.
How to lock the front casters for straight ahead or swivel freely operation.
How to adjust the drive clutch control for proper drive belt tension.
Periodic adjustment of the six-speed shift cable for proper operation.
Procedure for cleaning the mower deck and underside after use.
Key maintenance jobs for good engine performance, including oil and air cleaner.
Chart and instructions for lubricating various parts of the lawn mower.
Inspecting the blade adapter for cracks and periodic inspection.
Steps for safely removing the mower blade for sharpening or replacement.
Guidance on how to sharpen the mower blade correctly.
Method for testing and balancing the mower blade for smooth operation.
Procedure for reinstalling the blade and blade adapter onto the engine crankshaft.
Instructions for replacing the drive belt on the mower.
Steps to prepare the lawn mower for storage, including cleaning and lubrication.
Common causes and remedies for the engine not starting or having low output.
Troubleshooting steps for an engine that runs erratically or overheats.
Solutions for engine hesitation at high speeds and poor idling.
Addressing issues like excessive vibration, mower not mulching, or uneven cut.
Heed safety symbols and follow safe operating and maintenance practices for the engine.
Read the owner's manual for proper operation, care, and maintenance of the engine.
Information on the engine's compliance with emission standards.
Details on approved unleaded regular grade gasoline and octane rating.
Recommendations for improving engine performance at high altitudes.
Importance of maintenance for low emissions and warranty obligations.
Federal and state laws prohibit tampering with emission control system parts.
General information about the engine, including safety labels and serial number.
Importance of the engine serial number for identification and ordering parts.
Key specifications for engine tune-ups, such as valve clearance and spark plug gap.
Guidance on selecting the correct fuel and engine oil for optimal performance.
Steps for preparing the engine before fueling and checking engine oil.
Procedures for starting the engine, including priming and using the recoil starter.
Allow the engine to warm up before loading for optimal performance.
Guidelines for operating the engine, including angle limitations and potential restrictions.
How to properly stop the engine by releasing the brake control lever.
How to adjust engine speed and other settings.
Schedule, chart, and procedures for engine maintenance tasks.
Ensure the recoil starter is free from debris to prevent engine overheating.
Instructions for cleaning or replacing air cleaner elements to prevent wear.
Procedures for cleaning, checking gap, and replacing the spark plug.
Steps to drain fuel and prepare the engine for storage over 30 days.
Common engine problems, their probable causes, and remedies.
Proper disposal of used batteries, engine oil, gasoline, and other components.
Technical specifications for the engine, including bore, stroke, and weight.
Details on emission control systems, owner responsibilities, coverage, and limitations.
Kawasaki's liability limits, disclaimers, and state-specific legal rights.
How to obtain warranty service with proof of purchase from an authorized dealer.
Cases not covered by the MTD limited warranty, including normal wear and tear.
Information on implied warranties and limitations on remedies and damages.
How state law relates to the warranty and owner's specific legal rights.
