Need help?Do you have a question about the MTD 136-480A and is the answer not in the manual?
General| Brand | MTD |
|---|---|
| Model | 136-480A |
| Category | Lawn Mower |
| Language | English |
Provides critical safety instructions for handling flammable gasoline.
Stresses maintaining the unit and its safety devices in good working order.
Warns against abrupt stops/starts on slopes to prevent tipping.
Advises reducing speed on slopes and during turns to maintain stability.
Lists essential precautions for leaving the mower unattended, like parking brake and key removal.
Restricts operation to instructed adults to prevent accidents.
Advises clearing the work area of debris to prevent projectile hazards.
Provides essential safety and handling information for electric start model batteries.
Details the process for correctly installing the battery into the mower unit.
Explains the function and operation of the throttle control for engine speed and choke.
Describes the gear shift lever's function for selecting forward, neutral, or reverse gears.
Details the operation and locking mechanism of the mower's brake pedal.
Explains the function of the clutch pedal and its lockout mechanism for starting.
Describes the ammeter's function in indicating battery charge or discharge status.
Explains how to operate the lights, noting they function only when the engine is running.
Details the operation of the ignition switch for starting and stopping the engine.
Explains the procedure for using the recoil starter to start the engine.
Describes the lever used to raise/lower the cutting deck and disengage blades.
Covers height adjustment methods using height of cut stop and wheel adjusters.
Provides step-by-step instructions for starting the engine on both recoil and electric start models.
Outlines the procedure for safely stopping the engine on all models.
Details the steps for engaging the drive, selecting gears, and controlling the mower.
Details periodic maintenance for checking and changing engine oil.
Specifies lubrication points and frequency for bearings.
Provides instructions for adjusting the tension and alignment of the drive chain.
Explains the servicing requirements and schedule for the air cleaner.
Advises on cleaning the engine and blade housing after mowing.
Instructs to check belts for oil/dirt and mentions automatic tensioning.
Details spark plug gap setting, cleaning, and replacement recommendations.
Outlines the procedure for removing, sharpening, and replacing the mower blade.
Explains how to adjust the front wheel toe-in for proper steering.
Describes how to adjust the carburetor choke using remote controls.
Provides steps for removing and replacing the mower deck belt.
Details the procedure for removing the transmission drive belts.
Lists part numbers and descriptions for the Model 136-480A.
Lists part numbers and descriptions for the Model 136-485A.
Lists authorized service firms for MTD power equipment.
Directs users to authorized service for specific engine brands.
Outlines the manufacturer's policy regarding warranty claims and service.
To Next Page
