• To reduce fire hazard, keep mower free of grass,
leaves, or other debris build-up. Clean up oil or
fuel spillage. Allow mower to cool at least 5
minutes before stodng.
• Before cleaning, repairing, or inspecting, make
certain the blade and all moving parts have
stopped. Disconnectthe spark plugwire, and keep
the wire away from the spark plug to prevent
accidentalstarting.
• Check the blade and engine mounting bolts at
frequent intervals for proper tightness. Also,
visually inspect blade for damage (e.g., bent,
cracked or worn). Replace with blade which meats
odginal equipment specifications listed in this
manual
• Keep all nuts, bolts, and screws tight to be sure
theequipment is insafe workingcondition.
• Never tamper with safety devices, Check their
properoperation regulady.
&
After stdking a foreign object, stop the engine,
remove the wire from the spark plug, and
thoroughly inspect the mower for any damage.
Repair the damage before starting and operating
the mower.
Never attempt to make a wheel or cutting height
adjustmentwhilethe engine is running.
Grass catcher components are subject to wear,
damage and detsdorstion, which could expose
moving parts or allow objects to be thrown. For
safety protection, frequently check components
and replace with manufacturer's recommended
parts,when necessary.
• Mower blades are sharp and can cut. Wrap the
blade(s) or wear gloves, and use extra caution
when servicing them.
• Do not change the engine governor setting or
overspeed the engine. Excessive engine speeds
are dangerous.
WARNING - YOUR RESPONSIBILITY: Restrict the use of this power machine to persons who
read, undemtandand followthe warningsand instructionsinthis manual and onthe machine.
DANGER
Figure1 Safety Labels FoundOn Lawn Mower
4
To Next Page
Loading...
