MTD 618 - Parts List - Deck, Belts, and Hardware

43
NOTE: Tractor features vary by model. NOT all parts listed above and pictured on the previous page are standard equipment.
Model 618
REF.
NO.
PART
NO. DESCRIPTION
1 711-04069 Grass Catcher Pin
2 618-0565 Spindle Assembly, 5.75 Dia.
756-0980 Pulley Only
3 683-0198G 42-inch Deck Shell
4 683-0254 Deck Adjustment Bracket w/ Weld Nut
5 736-0140 Flat Washer,.385 x.62 x.063
6 710-0520 Hex Cap Screw, 1/4-20 x 1.5
7 710-0528 Hex Cap Screw, 5/16-18 x 1.25
8 710-0726 Self-tapping Screw, 5/16-18 x.75
9 710-0751 Hex Cap Screw, 1/4-20 x.62
10 710-1238 Hex Head Washer Screw, 5/16-18 x.875
11 710-0650 Self-tapping Screw, 5/16-18 x.75
12 710-3151 Hex Cap Screw, 5/8-18 x.875
13 712-0337 Hex Nut, 5/8-18
14 712-0417A Hex Flange Nut, 5/8-18
15 712-0431 Flange Lock Nut, 3/8-16
16 712-3004A Flange Lock Nut, 5/16-18
17 712-3006 Hex Nut, 1/4-20
18 712-3027 Hex Flange Lock Nut, 1/4-20
19 714-0470 Cotter Pin, 1/8 x 1.25
20 716-3020 Internal Snap Ring
21 717-04074 Deck Adjustment Gear
22 726-0233 Push Nut.25 x.5
23 731-1032B Side Discharge Chute Assembly
24 731-2486A Belt Cover
25 732-0306 Compression Spring,.406 x.531 x 1.75
26 732-0470A Extension Spring,.50 x 4.74
27 734-0973 Deck Wheel, 5 x 1.38
29 736-0119 Lock Washer, 5/16
30 736-0158 Lock Washer, 5/8
31 736-0162 Flat Washer,.64 x 1.0 x.12
32 736-0270 Bell Washer,.265 x.75 x.062
33 738-0373 Shoulder Screw,.498 x 1.53
34 741-0524 Bearing,.625 x 1.574 x.470
35 742-0616A Three-in-one Blade, Star Center, 21.23"
36 747-1116 Deck Release Pin
37 748-0331 Shoulder Spacer,.625 x.324
38 750-0932A Spacer,.635 x.88 x 1.72
39 683-0440 Deck Brake Assembly
40 754-0498 Deck Belt
41 756-0627B Idler Pulley, 3.5
42 756-1202 Double Pulley, 5.0
43 710-1830 Self-tapping Screw, 1/4-20 x 4.0
44 746-0970 Brake Cable, 5.05
45 783-1291 Idler Bracket
46 711-1534 Pin, 3/8-16, 3/8 x 3.27
47 712-3087 Wing Nut, 1/4-20
48 710-0599 Self-tapping Screw, 1/4-20 x.5
49 710-0134 Carriage Screw, 1/4-20 x.62
50 731-2363 Mulch Plug
51 783-1146A Deck Skirt
52 710-0136 Hex Cap Screw, 1/4-20 x 1.75
REF.
NO.
PART
NO. DESCRIPTION
NOTE: Tractor features vary by model. NOT all parts listed above and pictured on the previous page are standard equipment.
IMPORTANT: For a proper
working machine, use
Factory Approved Parts.
V-belts are designed to
engage and disengage
safely. A substitute (non
OEM) V-belt can be
dangerous by not
disengaging completely.