MTD 618 - Parts List - Deck Brake and Belt Components

45
NOTE: Tractor features vary by model. NOT all parts listed above and pictured on the previous page are standard equipment.
Model 618
REF.
NO.
PART
NO. DESCRIPTION
1 711-04069 Grass Catcher Pin
2 17982 Spindle Reinforcement Plate
3 618-0240A Spindle Assembly, 5.0 Dia.
756-1187 Pulley Only
4 618-0594 Double Pulley Spindle Assembly
618-0241 Double Pulley Spindle Ass’y -Electric PTO
756-0603 Pulley Only
5 683-0254 Deck Adjustment Bracket w/ Weld Nut
6 683-04103 46-inch Deck Shell
7 710-0167 Carriage Screw, 1/4-20 x.50
8 710-0344 Hex Cap Screw, 3/8-16 x 1.5
9 710-0501 Hex Cap Screw, 1/4-20 x 2.0
10 710-0514 Hex Cap Screw, 3/8-16 x 1.0
11 710-0528 Hex Cap Screw, 5/8-18 x 1.25
12 710-0599 Self-tapping Screw,1/4-20 x.5
13 710-0650 Self-tapping Screw,15/16-18 x.875
14 710-0703 Hex Screw, 1/4-20 x.75
15 710-0751 Hex Cap Screw, 1/4-20 x.62
16 710-1260A Self-tapping Screw, 5/16-18 x.75
17 712-0271 Hex Sems Nut, 1/4-20
18 712-0417A Hex Flange Nut, 5/8-18
19 712-0431 Flange Lock Nut, 3/8-16
20 712-3006 Hex Nut, 1/4-20
21 712-3027 Hex Flange Lock Nut, 1/4-20
22 714-0470 Cotter Pin, 1/8 x 1.25
23 717-04074 Deck Adjustment Gear
24 726-0233 Push Nut.25 x.5
25 731-1032B Side Discharge Chute Assembly
26 732-0306 Compression Spring,.406 x.531 x 1.75
27 732-0594A Extension Spring,.91 x 7.3
28 710-0578† Screw, 1/4-20 x 1.5
29 734-0973 Deck Wheel, 5 x 1.38
31 736-0119 Lock Washer, 5/16
32 736-0270 Bell Washer,.265 x.75 x.062
33 738-0347 Shoulder Spacer,.625 x 1.16
34 738-0373 Shoulder Screw
35 742-0611 Three-in-one Blade, Star Center, 16.28"
36 742-0612 Three-in-one Blade, Star Center, 14.88"
37 747-1116 Deck Release Pin
38 754-0349 Deck Belt, Poly
39 731-1636 Mulch Plug
40 756-0627B Idler Pulley, 3.5
41 736-0173 Flat Washer,.28 x.74 x.063
42 783-0139A Idler Bracket
43 783-0141 Center Deck Skirt
44 783-0142 RH Deck Skirt
45 783-1348A LH Belt Cover
46 783-0805C RH Belt Cover
17258D RH Belt Cover (Manual PTO)
47 712-3006 Hex Nut, 1/4-20
48 712-3087 Wing Nut, 1/4-20
49 712-3004A Hex Nut, 5/16-18
50 746-1107 Bracket Cable, 12"
51 750-1320 Spacer,.385 x.625 x.70
52 710-0805 Hex Cap Screw, 5/16-18 x 1.5
53 17116 Deck Brake Assembly
54 732-0429A Extension Spring,.5 x 3.97
55 748-0324 Shoulder Spacer
56 736-0418A Flat Washer,.34 x 2.25 x.1
57 711-1554 Pin, 1/4-20
58 711-0993 Belt Guard Pin
59 736-0140 Flat Washer,.385 x.62 x.06
REF.
NO.
PART
NO. DESCRIPTION
IMPORTANT: For a proper
working machine, use
Factory Approved Parts.
V-belts are designed to
engage and disengage
safely. A substitute (non
OEM) V-belt can be
dangerous by not
disengaging completely.