Need help?Do you have a question about the MTH Sunny Pool Series and is the answer not in the manual?
Ensure only qualified electricians connect electrical appliances like filter systems or spotlights.
Overview of all components included in the pool package, including equipotential bonding.
Read danger labels on steel plates and follow instructions before unpacking the steel casing.
Select a sunny spot protected from the wind for optimal pool placement.
Concreting the base with a reinforced plate (12-15cm thick) is recommended for levelness.
Ensure the ground is flat and clear of particles. Use ground protection tarpaulin for durability.
Install between 15-25°C. Avoid strong winds which can destabilize the casing.
Pools can be installed completely free-standing, partly in the ground, or fully in the ground.
Install on compacted natural ground of the slope, contained by a wall or embankment.
Use lean concrete (20cm thick) for backfilling; avoid free-flowing materials or vibration.
Depth can be increased by excavating a cone shape, up to specific limits per pool diameter.
Requires at least 2 people. Handle sharp steel casing edges with safety gloves.
Draw the pool outline on prepared ground using a cord compass for precise marking.
Position the tarpaulin on cleared ground and cut to size after the steel casing is installed.
Connect ground rail segments into a circle and position precisely on the marked circumference.
Place rolled steel casing on a board; ensure skimmer/nozzle cutouts are at the top.
Connect casing ends with the slot-in profile, ensuring proper fit without forcing.
Place foil in the center and spread outwards, ensuring even spacing on floor and wall.
Attach inner cover piping to steel jacket and secure with handrail profile.
Utilize special profile and wedge piping for easier installation and fold management.
Attach segments sequentially using connection tubes and adjust length as needed.
Add water (approx. 2cm), then smooth any remaining folds on the floor with a brush or feet.
Install skimmers/nozzles only when water level is just below their fitted position.
Stipulated by DIN/VDE standards for pools; protect connection parts from moisture.
Refill pool on the same day if emptied to prevent backfilling shifting and casing deformation.
Use the provided repair kit for inner cover damage; use outdoor paint for steel casing.
Remove fittings, lower water level if needed, and protect with a tarpaulin cover.
Add agent to prevent limescale, dirt, and algae, simplifying spring cleaning.
General| Brand | MTH |
|---|---|
| Model | Sunny Pool Series |
| Category | Swimming Pool |
| Language | English |
To Next Page