What to do if MTU 8V 4000 Lx2 x Engine displays HI T-Exhaust A9 error?
If your MTU Engine displays a HI T-Exhaust A9 error, it indicates that the exhaust temperature of that cylinder is too high compared to the average. You can resolve this by checking the emission values, ignition timing, and valve drive, ensuring that exhaust valves are closing correctly.
What to do if MTU 8V 4000 Lx2 x displays HI T-Exhaust A10 error?
If your MTU Engine displays a HI T-Exhaust A10 error, it indicates that the exhaust temperature of that cylinder is too high compared to the average. You can resolve this by checking the emission values, ignition timing, and valve drive, ensuring that exhaust valves are closing correctly.
General| Engine Type | Diesel |
|---|---|
| Cylinders | 8 |
| Fuel Type | Diesel |
| Aspiration | Turbocharged |
| Configuration | V-type |
| Cooling System | Liquid Cooled |
General information, nameplate, and safety instructions for product use.
Requirements for personnel and their organization for product operation and maintenance.
Safety measures to follow during product startup and operation.
Specific safety rules for gaseous fuel applications during startup and operation.
Safety rules to follow before, during, and after maintenance and repair tasks.
Safety regarding fire prevention, environmental protection, and handling of fluids.
Preconditions and procedures for starting the engine.
Procedure for safely shutting down the engine.
Steps for emergency shutdown and associated hazards.
Explanation of abbreviations used in fault messages.
List of fault codes and corrective actions from the genset control system.
List of fault messages originating from the Engine Control Unit.
To Next Page
