What to do if I see HIHI T-Exhaust Mean error on my MTU 12 V 4000 Lx4?
If the weighted average of all individual exhaust gas temperatures is too high on your MTU Engine, you should first check the emission values. Then, check the ignition timing and finally check the valve drive, ensuring the exhaust valves are closing properly.
What should I do if the MTU 12 V 4000 Lx4 Engine shows HI T-Exhaust Mean?
If the weighted average of all individual exhaust gas temperatures is too high on your MTU Engine, you should first check the emission values. Then, check the ignition timing and finally check the valve drive, ensuring the exhaust valves are closing properly.
What to do if HI T-Exhaust A1 appears on my MTU Engine?
If the individual exhaust gas temperature of this cylinder is too high in comparison with weighted average on your MTU Engine, you should first check the emission values. Then, check the ignition timing and finally check the valve drive, ensuring the exhaust valves are closing properly.
What should I do if HI T-Exhaust A2 is displayed on my MTU 12 V 4000 Lx4 Engine?
If the individual exhaust gas temperature of this cylinder is too high in comparison with weighted average on your MTU Engine, you should first check the emission values. Then, check the ignition timing and finally check the valve drive, ensuring the exhaust valves are closing properly.
What should I do if HI T-Exhaust A3 is shown on the MTU 12 V 4000 Lx4 Engine?
If the individual exhaust gas temperature of this cylinder is too high in comparison with weighted average on your MTU Engine, you should first check the emission values. Then, check the ignition timing and finally check the valve drive, ensuring the exhaust valves are closing properly.
What to do when MTU 12 V 4000 Lx4 Engine displays HI T-Exhaust A4?
If the individual exhaust gas temperature of this cylinder is too high in comparison with weighted average on your MTU Engine, you should first check the emission values. Then, check the ignition timing and finally check the valve drive, ensuring the exhaust valves are closing properly.
How to fix HI T-Exhaust A5 error on MTU 12 V 4000 Lx4?
If the individual exhaust gas temperature of this cylinder is too high in comparison with weighted average on your MTU Engine, you should first check the emission values. Then, check the ignition timing and finally check the valve drive, ensuring the exhaust valves are closing properly.
What are the possible solutions for the HI T-Exhaust A6 error on an MTU 12 V 4000 Lx4 Engine?
If the individual exhaust gas temperature of this cylinder is too high in comparison with weighted average on your MTU Engine, you should first check the emission values. Then, check the ignition timing and finally check the valve drive, ensuring the exhaust valves are closing properly.
How can I troubleshoot the HI T-Exhaust A7 error on my MTU 12 V 4000 Lx4 Engine?
If the individual exhaust gas temperature of this cylinder is too high in comparison with weighted average on your MTU Engine, you should first check the emission values. Then, check the ignition timing and finally check the valve drive, ensuring the exhaust valves are closing properly.
What steps should I take to resolve the HI T-Exhaust A8 error on an MTU 12 V 4000 Lx4 Engine?
If the individual exhaust gas temperature of this cylinder is too high in comparison with weighted average on your MTU Engine, you should first check the emission values. Then, check the ignition timing and finally check the valve drive, ensuring the exhaust valves are closing properly.
General safety information, correct use, modifications, and spare parts.
Requirements for personnel, training, and personal protective equipment.
Safety measures for starting, operating, and emergency stops.
Specific safety rules for gaseous fuel systems during startup and operation.
Safety procedures before, during, and after maintenance and repair.
Specific safety rules for gaseous fuel systems during maintenance and repair.
Detailed technical specifications and reference conditions for the engine.
Technical data for emissions-optimized engine versions.
Overview of engine monitoring and control systems.
Function and structure of the ECU 9 engine governor.
Function and purpose of the Engine Monitoring Unit EMU 8.
Detailed steps for engine start, stop, and emergency stop sequences.
Preconditions and procedure for starting the engine.
Preconditions and procedure for safely shutting down the engine.
Procedure and actions for emergency engine shutdown and related safety.
List of fault messages for genset control with causes and corrective actions.
Fault messages specific to the engine governor with causes and corrective actions.
To Next Page
General