How do I address the HI T-Exhaust A9 error code on my MTU 12 V 4000 Lx4?
If the individual exhaust gas temperature of this cylinder is too high in comparison with weighted average on your MTU Engine, you should first check the emission values. Then, check the ignition timing and finally check the valve drive, ensuring the exhaust valves are closing properly.
What is the procedure for fixing the HI T-Exhaust A10 error on the MTU 12 V 4000 Lx4?
General safety information, correct use, modifications, and spare parts.
Requirements for personnel, training, and personal protective equipment.
Safety measures for starting, operating, and emergency stops.
Specific safety rules for gaseous fuel systems during startup and operation.
Safety procedures before, during, and after maintenance and repair.
Specific safety rules for gaseous fuel systems during maintenance and repair.
Detailed technical specifications and reference conditions for the engine.
Technical data for emissions-optimized engine versions.
Overview of engine monitoring and control systems.
Function and structure of the ECU 9 engine governor.
Function and purpose of the Engine Monitoring Unit EMU 8.
Detailed steps for engine start, stop, and emergency stop sequences.
Preconditions and procedure for starting the engine.
Preconditions and procedure for safely shutting down the engine.
Procedure and actions for emergency engine shutdown and related safety.
List of fault messages for genset control with causes and corrective actions.
Fault messages specific to the engine governor with causes and corrective actions.
To Next Page
General