MTX RZR-14-SW - User Manual

MTX.COM
RZR-14-SW
POLARIS
®
RZR
®
SUBWOOFER ENCLOSURE
OWNER’S MANUAL

Summary

Introduction and Support

Critical Safety Warnings

Crucial safety notices regarding battery disconnection and power wire fusing.

Product Features and Specifications

Technical Specifications

Details power handling, sensitivity, frequency response, and impedance.

Disassembly - RZR Models 2019+

Center Dash Compartment and Top Panel Removal

Steps 3-4 cover removing the center dash compartment and the main dash top panel.

Dash Pocket Brace and T-Handle Removal

Gauge, Switch, and Dash Assembly Removal

Passenger Compartment and Glove Box Fastener Removal

Glove Box and Passenger Footrest Screw Removal

Disassembly - RZR Models 2014-2018

Hood and Top Dash Cover Removal

Steps 1-3 cover releasing hood locks and removing the hood and top dash cover.

Top Dash Cover, Wiring, and Dash Pocket Removal

Dashboard Mounting Screws and Dash Pull

Dash Removal and Glove Box Frame Bolt Extraction

Installation Procedure

Mounting Bracket and Enclosure Attachment

Steps 1-2 guide installing the mounting bracket and hanging the subwoofer enclosure.

Final Fastening and Wiring Feed

Steps 3-5 involve installing Torx screw, tightening hardware, and feeding wires.

MTX RZR-14-SW Specifications

General

Material	MDF
Weight	30 lbs
Compatibility	2014-2018 Polaris RZR XP1000 and XP Turbo
Enclosure Type	Sealed
Color	Black
Type	Subwoofer Enclosure