EasyManua.ls Logo

MTX Thunder 8000 T8154A User Manual

MTX Thunder 8000 T8154A
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Features - Características - Caractéristiques - Technische Informationen
Thunder 8000A 15" 4 Ohm Subwoofer
Specifications
- Especificaciones - Données techniques - Spezifikationen
Fs
Vas 5.42 Ft^3 (153.6 l)
Qts
Qes
Qms
Re
Xmax .49” (12.4 mm)
D 13.267” (.3370 m)
RMS
RMS
SPLo
No
Le
.393” (10.0 mm)
1.252” (31.8 mm)
2.5” (63.5 mm)
102 oz (2892 g)
BL
Cms
Mms
Mmd
Rms
Sd 138.2 in^2 (.0892m^2)
14 (355.6 mm)
15 11/16” (398.5 mm)
6 15/16” (176.2 mm)
7 1/2 (190.5 mm)
352in^2 (5.8 l)
235in^2 (3.9 l)
*Dual voice coil models measured with coils in parallel
21A5354
Voice Coil Diameter
- Diámetro del Bobina móvil - Diamètre de la bobine - Schwingspuledurchmesser
.138 mm/N
321.4 g
3.76 Ohm
500 Watts
75-500 Watts
89.5 dB
Gap Height
- Altura del espacio - Hauteur de l'entrefer - Abstandshöhe
Reference Efficiency
- Eficiencia de referencia - Efficacité de référence - Bezugswirkungsgrad
DC Resistance
- Resistencia de CC - Résistance de la bobine au courrant continu - Gleichstromwiderstand
306.1 g
9.69
0.53%
24 - 150Hz
4.4 mH
21.87 Tm
.38
4.99
Free Air Resonance
- Resonancia de atmósfera libre - Fréquence de résonance - Free Air-Resonanz
Volume Acoustic Suspension
-Volumen de suspensión acústica - Volume équivalant à l'élasticité de la suspension - Äquivalenzvolumen
Total Q
- Q total - Coefficient de surtension total - Gesamtgüte
Electrical Q
- Q eléctrica - Coefficient de surtension électrique - Elektrische Güte
Mechanical Q
- Q mecánica - Coefficient de surtension mécanique - Mechanische Güte
23.9 Hz
.35
Linear Excursion (One Way)
- Excursión lineal (unidireccional) - Excursion maximum (dans un sens) - Lineare Auslenkung (eine Richtung)
Effective Piston Diameter
- Diámetro efectivo del pistón - Diamètre de la membrane - Effektiver Kolbendurchmesser
Speaker Displacement (Outside Box)
-
Desplazamiento del altavoz (caja exterior) - Volume occupé par le haut-parleur (montage extérieur) - Lautsprecherverdrängung (außerhalb des Gehäuses)
Suspension Losses
- Pérdidas de suspensión - Pertes dans la suspension - Aufhängungsverlust
Effective Surface Area
- Área superficial efectiva - Surface de la membrance - Wirksame Oberfläche
Mounting Diameter
- Diámetro de montaje - Diamètre de montage - Einbaudurchmesser
Overall Diameter
- Diámetro total - Diamètre extérieur - Gesamtdurchmesser
Overall Depth -
Profundidad total - Profondeur totale - Gesamttiefe
Speaker Displacement (Inside Box)
- Desplazamiento del altavoz (caja interior) - Volume occupé par le haut-parleur (montage intérieur) -Lautsprecherverdrängung (im Gehäuse)
Motor Force
- Fuerza motriz - Facteur force - Schwungkraft
Compliance
- Cumplimiento - Compliance - Compliance
Total Moving Mass
- Masa total en movimiento - Masse totale en mouvement - Gesamte bewegte Masse
Moving Mass of Driver
- Masa en movimiento del altavoz - Poids de la membrane - Bewegte Masse des Subwoofers
Magnet Weight
- Imán - Poids de la structure magnétique - Magnet
Mica-filled polypropylene cone, with aluminum finish
- Cono de aleación de Polipropileno con Mica - Cône polypropylene rempli de mica - Mika-gefüllter Polypropylen-Schalltrichter mit Aluminiumüberzug
T8154A Technical Data Report
Mounting Depth
- Profundidad de montaje - Profondeur de montage - Einbautiefe
Frequency Response
- Respuesta de frecuencia - Réponse en fréquence - Frequenzgang
Voice Coil Inductance
- Inductancia de la bobina móvil - Inductance de la bobine mobile - Schwingspuleninduktivität
Voice Coil Height
- Altura de la bobina móvil - Hauteur de la bobine - Schwingspulenhöhe
RMS Power Handling
- Potencia máxima efectiva - Puissance RMS - Nennbelastbarkeits-Effektivwert
Recommended Amplifier Power
- Potencia de amplificacion recomendada - Puissance recommandee - Empfohlene verstakerleistung
Sensitivity 1W/1m
- Sensibilidad - Efficacité 1W/1m - Empfindlichkeit
Polyimide Voice Coil Former
- Formador de Bobina de Voz de poliamide - Gabarit de bobine de voix de polyamide - Polyamide Stimmeformerspule
12 Stiffening Ribs
- 12 costillas de refuerzo - 12 nervures de renforcement - 12 Versteifungsrippen
Machine Turned Plates
- Placas maquinadas - Plaques de champ fraisées - Maschinell geschliffene platte
Spider Plateau Venting
- Ventilación de la placa de la pieza de centrado - Aération plateau à croisillons - Zentriermembranplateau-Entlüftung
Apical Voice Coil Former
- Formador Cilíndrico de Bobina de Voz - Gabarit de bobine de voix apical - Sprechspulenkörper
Laminated, hot pressed, Nomex & Polycotton spider
- Circuito de Suspensión de Nomex y Polialgodón - Spider de nomex et de polyester et coton - Laminierte, warmgepresste Nomex- und Polycotton-Suspensionen
Asymmetrical Linear Drive
- Excitación lineal asimétrica - Asymmetrical Linear Drive System - Asymmetrisches, lineares Antriebssystem
Congruent Edge Technology
- Tecnología de borde continuo - Technologie de pointe congruente - Kongruenzkantentechnologie
Extended Pole Piece
- Pieza polar extendida - Morceau polaire etendu - Erweitert Stabteil
Question and Answer IconNeed help?

Do you have a question about the MTX Thunder 8000 T8154A and is the answer not in the manual?

MTX Thunder 8000 T8154A Specifications

General IconGeneral
BrandMTX
ModelThunder 8000 T8154A
CategorySubwoofer
LanguageEnglish

Summary

Product Features

Mica-Filled Polypropylene Cone

Cone made of mica-filled polypropylene with an aluminum finish.

Machine Turned Plates

Plates that have been machined for precision.

Spider Plateau Venting

Venting feature integrated into the spider plateau.

Apical Voice Coil Former

Voice coil former with an apical shape.

Nomex & Polycotton Spider

Spider made of laminated, hot-pressed Nomex and Polycotton.

Asymmetrical Linear Drive System

System designed for asymmetrical, linear driving force.

Congruent Edge Technology

Technology focused on the cone's edge for consistent performance.

Extended Pole Piece

Pole piece that is extended for enhanced magnetic field.

Polyimide Voice Coil Former

Voice coil former constructed from polyimide material.

Technical Specifications

Free Air Resonance & Acoustic Parameters

Key parameters including Free Air Resonance, Total Q, Electrical Q, and Mechanical Q.

Linear Excursion & Power Handling

Specifications for linear excursion, RMS power handling, and recommended amplifier power.

Sensitivity & Frequency Response

Details on sensitivity, reference efficiency, and frequency response range.

Voice Coil & Motor Specifications

Information on voice coil inductance, height, diameter, and motor force.

Mass, Compliance & Surface Area

Data on total moving mass, compliance, suspension losses, and effective surface area.

Mounting & Displacement Dimensions

Specifications for mounting diameter, overall dimensions, and speaker displacement.

Enclosure Design Recommendations

Sealed Enclosures

Technical data for sealed enclosure designs, including volume and F3.

Vented Enclosures

Technical data for vented (bass reflex) enclosure designs, including volume and tuning.

Single Reflex Bandpass Enclosures

Technical data for single reflex bandpass enclosure designs and their frequency responses.

Related product manuals