MTX Thunder TA91002 User Manual (English)

To Next Page

TA91002 Owner’s Manual

Introduction

Thank you for choosing MTX to help reach the ultimate goal with your vehicle. Adding MTX ampliﬁ ers and

matching MTX speakers and subwoofers with StreetWires connections will put you in a better position to

hear, feel, and experience all of the music the artist intended.

Speciﬁ cations

Primary Ratings

Power Output: 250 watts RMS x 2-channels at 4 ohm and

≤

1% THD+N

Signal-to-Noise Ratio (1 watt): >71dB

Secondary Ratings

Power Output: 500 watts RMS x 2-channels at 2 ohm and

≤

1% THD+N

Power Output: 750 watts RMS x 2-channels at 1 ohm and

≤

1% THD+N

Power Output: 1,000 watts RMS x 1 bridged at 4 ohm and

≤

1% THD+N

Power Output: 1,500 watts RMS x 1 bridged at 2 ohm and

≤

1% THD+N

THD+Noise (Distortion) (1 watt):

≤

.1%

Frequency Response (-3dB): 20Hz-20kHz

Maximum Input Signal: 10V

Maximum Sensitivity: 100mV

Dimensions: 9-5/8” x 24-11/16” x 2-1/2” (245mm x 625mm x 65mm)

Smart Engage™ Auto-Turn-On (Patent No: US06556683)

Patented Pure N-Channel Technology (Patent No: US05631608, US05783970)

Patented Power Supply (US05598325)

Input Sensitivity Switch: 100mV-1V/1V-10V

Crossover: Hi, 12dB / Low, 24dB Mono @ 40Hz-350Hz, Defeat

Subsonic @ 30Hz, 12dB/oct, Defeat

Parametric EQ: Boost/Cut +/-12dB, Freq. 30Hz-80Hz, Q 0.5-4.0

ARC: Cut 0-15dB, Freq. 200Hz

Remote Subwoofer Level Control

Defeatable feature Bypass

Features

1. Prizm EFX – All MTX ampliﬁ ers include backlit adjustment controls on the top surface of the product.

• Color – The backlit controls offer unlimited colors on the display -- from RED, GREEN, and BLUE to any color

in between.

• EFX – You can switch Prizm EFX lighting to “pulsate” with the beat of the music.

2. Xtant Technology Cooling (XTC) – A thermal-regulated turbo-charged intercooler supplies fan forced cool air

evenly and constantly through tightly packed bonded ﬁ ns. Fan speed is continuously variable and controlled

by the ampliﬁ er’s output level, temperature of the heatsink and transformers. Exhaust from the internal

heatsink is strategically positioned to cool the transformers and maintain maximum performance at all

volumes.

3. Bi-Level Inputs with Smart Engage™ – All MTX ampliﬁ ers feature RCA type input connections. All MTX

ampliﬁ ers allow both high level and line level input into the RCA type input connections.

• Low Level Input – Source units with an output signal level of 100mV–10V may be used. See Input Sensitivity

for proper voltage level setting.

• High Level Inputs with Smart Engage™ – All MTX ampliﬁ ers allow high level inputs through RCA type input

connections using provided high level adapters. Source units with an output signal level of 100mV–10V may

be used. See Input Sensitivity for proper voltage level setting.

Need help?

Do you have a question about the MTX Thunder TA91002 and is the answer not in the manual?

MTX Thunder TA91002 Specifications

General

Channels	2
RMS Power at 4 Ohms	100W x 2
RMS Power at 2 Ohms	150W x 2
Bridged RMS Power at 4 Ohms	300W x 1
Frequency Response	20Hz - 20kHz
RMS Power Output	300W
Peak Power Output	600W
THD at Rated RMS Power	0.05%
Crossover Frequency	50Hz
Fuse Rating	30A
Minimum Impedance	2 Ohms
Crossover Type	Variable high-pass/low-pass