EasyManua.ls Logo

MTX TP112 User Manual

MTX TP112
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
TP112
OWNER'S MANUAL
SPECIFICATIONS- TP112
Diameter of Subwoofer (1) 12"
Type Full Range
Frequency Response 33Hz - 22kHz
Nominal Impedance 8 Ohm
Sensitivity (1w-1m) 92 dB
Power Handling (Watts) 150 RMS/300 Peak Power
Crossover Frequency 2.2 kHz
Weight 37 lbs
Dimensions 24.5"H x 14.65"W x 12.5"D
Warranty Statement
MTX TP112 purchased in the USA from an authorized MTX dealer are guaranteed against defects in
material and workmanship for the period of five years from the date product is purchased by the end
user. This warranty is limited to the original retail purchaser of product. Product found to be defec-
tive during that period will be repaired or replaced by MTX at no charge. This warranty is void if it is
determined that unauthorized parties have attempted repairs or alterations of any nature. Warranty
does not extend to cosmetics or finish. Before presuming a defect is present in the product, be cer-
tain that all related equipment and wiring is functioning properly. MTX disclaims any liability for other
incurred damages resulting from product defects. Any expenses in the removal and reinstallation of
products are not covered by this warranty. MTX's total liability will not exceed the purchase price of
the product. If a defect is present, your authorized MTX dealer may be able to effect repairs.
Proof of purchase is required when requesting service, so please retain your sales receipt and take
a moment to register your warranty online at www.mtx.com
21A6965
One Mitek Plaza, Winslow, IL. 61089
1-800-225-5689 www.mtx.com
Question and Answer IconNeed help?

Do you have a question about the MTX TP112 and is the answer not in the manual?

MTX TP112 Specifications

General IconGeneral
Impedance8 Ohms
ManufacturerMTX
ModelTP112
RMS Power100W
Peak Power200W
Driver Size12 inches
Woofer Size12 inches

Summary

Speaker Specifications

Warranty Statement

Amplifier Considerations

Speaker Hook Up

5-Way Binding Posts

Procedure for connecting speakers via 5-way binding posts, ensuring correct polarity for optimal audio.

1/4" Phone Jack Connection

Instructions on how to utilize the 1/4" phone jack for connecting the speaker to an amplifier.

Connecting Two Speakers to Stereo Amplifier

Guide for connecting a pair of TP112 speakers to a stereo amplifier for a stereo listening experience.

High Frequency Protection Circuit

Related product manuals