Mueller B-50-B18 User Manual

Barrie, ON, L4N 8Z9
www.muellercanada.com
Copyright © 2014 Mueller Co., LLC. All Rights Reserved. The trademarks, logos and service marks displayed in this document are the property of
Mueller Co., LLC, its affiliates or other third parties. These products are intended for use in potable water applications. Please contact your Mueller Sales or
Customer Service Representative concerning any other application(s).
Form MC005-rev04/15 Printed in U.S.A.
1. Mueller Canada has made every effort to ensure that this manual is accurate and correct, and cannot be held liable for its misuse. Part numbers shown are
current at time of printing and may be subject to change due to changes in design or material.
2. Standard safety practices should be observed when working with the equipment described herein, or any other associated tools.
3. Mueller Canada will assume no responsibility or liability for any malfunction or damage caused by, or resulting from, the use of parts not manufactured by
Mueller Canada. Use of such parts will void any and all warranties as well as third party approvals and endorsements.
! CAUTION !
CENTURY FIRE HYDRANT
B-50-B18 HYDRANT
B-50-B24 HYDRANT
Operating
Instructions

Mueller B-50-B18 Specifications

General

Brand	Mueller
Model	B-50-B18
Category	Other
Language	English

Summary

Installation, Operation, and Inspection

Installation Procedures

Proper handling, placement, anchoring, and initial flushing of hydrants.

Hydrant Operation

Guidelines for opening and closing hydrants, emphasizing full open/closed positions.

Inspection Guidelines

Procedures for regular inspection of external condition, valve leakage, and barrel/drain leakage.

Drainage and Maintenance

Checks for non-draining hydrants, drainage verification, and general maintenance tasks.

Internal Parts Removal and Valve Rubber Replacement

Removal of Internal Parts Procedure

Step-by-step guide for safely disassembling and removing internal hydrant components.

Hydrant Valve Rubber Replacement

Detailed procedure for replacing the valve rubber using specific part numbers and diagrams.

Hydrostatic Test and Storz Installation

Hydrostatic Test Procedure

Steps to perform a hydrostatic test, checking for leaks at various connection points.

100mm Storz Adapter Installation

Guidance on installing a 100mm Storz adapter onto a pumper nozzle.

Storz Nozzle Installation

Procedure for installing the Storz connector onto the hydrant pumper nozzle.