CAUTION:
This manual describes the recommended procedures for installation, adjustment,
operation and maintenance of Hydro Gate gates. When it is used in conjunction with
installation drawings that have been supplied by us, this manual will be sufcient for
most installations. Proper care and precautions must be taken in handling and storing
the gates at the delivery site. For further details on the handling, storing, and installation
of a specic project, contact the Hydro Gate headquarters.
Precise and accurate installation is critical to satisfactory operation. We assume no
liability, expressed or implied, for interpretation of the contents of this manual. If
you have any questions concerning the interpretation of the contents of this manual
or installation procedures in general, you should contact the Hydro Gate facility in
Colorado. We expressly disclaim all liability, expressed or implied, for faulty installation
of any gate or associated equipment and for any direct, consequential, or incidental
damages that may result.
F 13922 1/19
TABLE OF CONTENTS PAGE
General Information 2
Installation 2-8
Operation 9
Maintenance 10-11
Leakage / Troubleshooting 12-13
Storage 13
Parts 14-16
HG561 Fabricated
Slide Gates
OPERATING INSTRUCTIONS MANUAL
To Next Page
Need help?
General