Check if the power cord is tightly plugged into electrical outlet.
Check if the power cord is damaged.
Check if electrical outlet is working by plugging in another appliance.
Make sure the latches are in the locked position.
Make sure the bag is placed correctly inside the Vacuum Chamber.
Allow the appliance to cool off for 40 seconds before using it again.
Make sure the opening of the bag is placed entirely inside Vacuum
Chamber.
Examine the bag for leaks. Seal bag with air, then immerse it in water
and apply pressure. Bubbles indicate a leak, use a new bag if bubbles
appear.
Check the seal of bag. A wrinkle in the bag along the seal may cause
leakage and allow air to re-enter, just cut bag and reseal.
AIR IS STILL IN THE BAG AFTER SEALING
Nothing happens when you try to vacuum:
Note: To prevent overheating of the appliance, allow the appliance to cool
off for 40 seconds before using it again, and keep the cover open
11
To Next Page
Loading...
Need help?
General