12
HOW TO DISASSEMBLE AND CLEAN
1
3
2
4
Turn the machine ‘OFF’
and unplug the electric cord.
1
2
Twist the hopper to unlock by grabbing
the two ejections.
Make sure the arrow is aligned with the
open sign before pulling off the bowl.
Use the BRUSH to clean thoroughly
after operating.
Do not use metal sponge to clean,
it will damage the machine.
Do not use dishwasher to clean.
5
6
Do not rinse the base with direct
water, use day towel or wet towel
to clean.
Please DRY the attachments after
cleaning and do not forget to
place back the yellow rubber
pad at the bottom of the bowl.
1. Hopper
2. Squeezing screw
3 Strainer
4 Spinning brush
5... Bowl
6. Rubber pad
ORDER TO DISASSEMBLE
To Next Page
Loading...