EasyManua.ls Logo

Mueller UltraStorm LB-570 - Using Your UltraStorm Cordless Leaf Blower; Before the First Use; Assembly Instructions; Connecting and Removing the Battery

Mueller UltraStorm LB-570
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The battery is pre-charged before shipping. However, before using the blower for the
first time, place the battery in the battery charger and charge it until the GREEN charge
indicator light turns ON.
ATTENTION! The rechargeable battery will become hot with heavy use. Allow the
rechargeable battery to cool to room temperature before recharging.
DO NOT charge the battery for more than 5 hours at a time.
Make sure to read all safety precautions and follow the instructions in this section.
USING YOUR ULTRASTORM CORDLESS LEAF BLOWER:
BEFORE THE FIRST USE:
Before assembling the product, make sure all parts are present. Compare parts with
package contents list. If any part is missing or damaged, do not attempt to assemble
the product.
ASSEMBLY INSTRUCTIONS:
WARNING: To prevent accidental starting that could cause serious personal injury,
always remove the battery from the Motor Unit when assembling parts.
ASSEMBLING THE BLOWER TUBE:
Slide the Lower Tube over the end of
Upper Tube, aligning the triangular tab
and node until locked into place.
Align the widest end of the Upper
Blower Tube with the front opening on
the Motor Unit and lock into place.
CONNECTING AND REMOVING THE BATTERY:
IMPORTANT!
To remove the battery
Grasp the blower firmly. Press
and hold down the release button
on the battery.
Pull the battery out of the Motor Unit.
1
2
1
2
6
1
2