Need help?Do you have a question about the MUGEN MBX-6 ECO and is the answer not in the manual?
Securing the motor to the chassis, ensuring proper gear mesh.
Attaching the speed controller to the chassis for power management.
Assembling the front differential unit for power distribution.
Assembling the front gear box housing and gears.
Assembling the front damper units with oil and springs.
Steps for preparing, operating, and completing model use safely.
Common problems and their solutions for the model.
Safe practices for operating the high-speed RC car.
Essential checks before operating the model.
Safety warnings and advice during model operation.
Post-operation procedures and safety advice.
Safe procedures for handling and charging batteries.
General| Scale | 1/8 |
|---|---|
| Drivetrain | 4WD |
| Fuel Type | Electric |
| Suspension | Independent |
| Chassis | Aluminum |
| Shock Type | Oil-filled |
| Differential | 3 Gear Differentials |
| Tire Type | Off-road |
| Wheelbase | 320 mm |
| Type | Buggy |
To Next Page
