EasyManuals Logo

Muller licht Tint 404011 User Manual

Muller licht Tint 404011
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
tint-REMOTE CONTROL
40
INSTRUCTION MANUAL
Think beforehand about which bulbs you want to group together and try to make the
groups logical and comprehensible. This means you will be able to use the groups
later using the group button quickly and without having to waste time testing them.
Using the group button
The first time the group button is pressed, the LEDs above it will show which group
you are in.
Pressing it again will advance you one group.
You are in the next group when the following LED above the group button lights up:
°
LED 1 for the first group
°
LED 2 for the second group
°
LED 3 for the third group
°
LED 1, 2 and 3 for all groups
Using the group button
The first time the group button is pressed, the LEDs above it will show which group
you are in.
Pressing it again will advance you one group.
You are in the next group when the following LED above the group button lights up:
°
LED 1 for the first group
°
LED 2 for the second group
°
LED 3 for the third group
°
LED 1, 2 and 3 for all groups
Adding a new bulb
Take note of the technical specifications when purchasing new bulbs. We recom-
mend tint bulbs from Müller-Licht. When using bulbs made by other manufacturers,
it is not guaranteed that all features will be supported or will work as intended.
If you are using a white tint bulb that only emits white light, the coloured light
features will not be available. The bulb will be switched off.
1. Unplug the lamp at the mains, remove the old bulb and screw the new tint bulb into
the socket.
2. Plug the lamp back in at the mains and set the corresponding light switch to I or
ON.
The new bulb will signal that it is in coupling mode by briefly increasing and decre
-
asing its brightness and changing colour if applicable. If this does not occur, switch
the bulb off and on again 5 times.
3. Press the group button repeatedly until all the LEDs above the group button light up.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Muller licht Tint 404011 and is the answer not in the manual?

Muller licht Tint 404011 Specifications

General IconGeneral
BrandMüller Licht
ModelTint 404011
TypeRemote Control
Power sourceBattery
Batteries requiredYes
Radio frequency2.4 GHz
ConnectivityRadio Frequency
RangeUp to 30 meters
Battery TypeAAA
Battery Life2 years (typical use)

Related product manuals