Multi-Clean 421020 User Manual

CART MODEL 421020
Parts List
Part # Qty. Description
A 1 Cross-Member
B 2 Side Frame
C 2 Cross-Member w/Mounting Holes
H 1 Handle
K 4 ¼ x 2 PH Screw
L 4 ¼ Locknut
M 1 5/8 D Axle
N 2 10” K16 Wheel
0 8 5/8 ID Washer
P 4 Cotter Pin
988366
6-24-03
Use these holes for axle
Axle placement
H
N
M
K
L
O
P
P
A
B
C
C
ASSEMBLY PROCEDURE:
1. Insert cross-member (A) in top holes of
side frames. Insert cross-members (C)
(pre-drilled mounting holes for Versa-
Station) in bottom 2 holes.
2. Insert the handle (H) into the side frame
(B) socket and secure with fasteners
(K& L).
3. Slide axle (M) through side frame (B)
axle hole as shown. Insert 2 washers
(0) on the axle between the frames.
4. Install 2 cotter pins (P) in the axle
between the side frames with the
washer between the cotter pin and side
frame.
5. Assemble the wheels onto the axle with
2 washers on the inside and 1 outside
the wheel. Secure with a cotter pin (P)
through the end of the axle (M).

Multi-Clean 421020 Specifications

General

Brand	Multi-Clean
Model	421020
Category	Racks & Stands
Language	English

Summary

Cart Assembly

Cart Parts List

Lists all parts required for assembling the Multi-Clean cart, including cross-members, frames, handle, and fasteners.

Cart Assembly Procedure

Step-by-step instructions for assembling the Multi-Clean cart, covering frame insertion, handle attachment, axle placement, and wheel assembly.

FRS Dispenser Mounting

FRS Dispenser Parts List

Lists parts for mounting the FRS dispenser, including screws, nuts, washers, and the mounting bar.

FRS Dispenser Mounting Procedure

Instructions for mounting the FRS Dispenser to the cart, detailing screw and nut usage for securing the rack and dispenser.