To simplify this installation
products
is
identical
manual,
all
graphical
concerning interface
on
the
representations of ACP
existing phone wiring. The ACP
product
in
wiring schematics
is
designed to
process
and
are of the 3-port model.
You
route
all
incoming
calls
to data
may be installing
an
ACP-5, and telephone equipment
which
is
a
5-port
device.
The connected through the ACP to
installation procedure for both
the phone line.
WARNING
The key to proper operation of the ACP
is
CORRECT
installation. It
is
VITALLY IMPORTANT that
you
install
the
ACP unit between the telephone wiring demarcation point
and
all
station equipment (including KEY systems).
Before
installing the ACP
on
(supplied) and plug it into a 110
the telephone line, it
is
a good
VAC,
50-60 Hz electrical outlet.
idea to
check
for functionality Next, plug the power line
by “powering up” the unit. Take
(attached to the transformer)
the
AC
power transformer into the rear of the
ACP,
here:
4
To Next Page
Loading...