4
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF
ELECTRICAL & ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical &
Electronics Equipment (WEEE). Any WEEE marked products must not be mixed with general
household waste, but kept separate for the treatment, recovery and recycling of the materials
used. Contact your local authority for details of recycling schemes in your area.
Made in the UK. LS12 2QQ
Man Rev 1.1
OPERATION
To start your Pi:
Press the STAND-BY button > 1 sec.
LED ring goes GREEN.
To Shut down:
Press the STAND-BY button > 3 sec.
LED ring ashes RED.
Forced Shut down:
Press the STAND-BY button > 10 sec.
LED ring ashes RED.
Note: The upper USB socket must be used to
connect the Power Supply to the Pi.
If the lower socket is used the push button
startup/shutdown will not function.
To Previous Page
Loading...