User Manual: PS020A DMX-controlled 3-CHANNEL Power Supply
V1.00 (06-2007) © Multiform, Leigh-on-Sea, UK 10
A16 Hard switch turquoise-pink Sound-to-light, Speed
A17 Hard switch red-green-blue Sound-to-light, Speed
A18 Hard switch red-yellow-green-turquoise-blue-pink Sound-to-light, Speed
A19 Random speed red-yellow (Fire) None
A20 Random speed green-blue (Ocean) None
A21 Random speed red-blue None
A22 Random speed red-green-blue (RGB) None
A23 White strobe Sound-to-light, Speed
A24 Red strobe Sound-to-light, Speed
A25 Green strobe Sound-to-light, Speed
A26 Blue strobe Sound-to-light, Speed
A27 Strobe chase red-green-blue Sound-to-light, Speed
“C” Colour Mode
Press the MODE button (5) until the first digit on the display shows “C”, indicating
operation in “C” (COLOUR) mode. Then choose by using the UP/DOWN buttons (6/7)
one of the 19 preset colours as shown in the list below. Changing the setting becomes
effective directly. Knob (1) determines the dimming level.
In “C” mode, the unit does not receive any values from the DMX input but generates
related DMX values on the output according to the selected pattern, so that other
similar units from the Multiform LS series of LED devices can show the same colour if
they are connected by DMX signal cables and set to Slave Mode “SLA”.
NOTE
: The “C” Mode is automatically disabled and can not be chosen when an
external DMX signal is received [DMX indicator LED (3) is lit].
If you leave mode “C” for any reason and come back later into mode “C”, the unit will
recall the last chosen colour (even if the unit was switched off in between).
Available colour presets:
C 0 all off C10 Frog
C 1 Red C11 Lavender
C 2 Green C12 Candy
C 3 Blue C13 Peach
C 4 Yellow C14 Aqua
C 5 Pink C15 Leaf
C 6 Turquoise C16 Purple
C 7 Lime C17 Barbie
C 8 Orange C18 Breeze
C 9 Marine C19 White
User Manual: PS020A DMX-controlled 3-CHANNEL Power Supply
V1.00 (06-2007) © Multiform, Leigh-on-Sea, UK 7
■ Getting started: choosing a location
Risk of fire: The PS020A DMX-controlled 3-Channel power supply has
been designed to work in dry indoor environments at environmental
temperatures up to 40 degrees Celsius. For proper operation, the
PS020A DMX-controlled 3-Channel power supply must be operated
with its heatsink side up, and unobstructed air convection to the
heatsink.
Do not:
- Operate the PS020A DMX-controlled 3-Channel power supply in
environments with more than 40 degrees environmental temperature or more
than 80% humidity.
- Operate the PS020A DMX-controlled 3-Channel power supply in any position
inclined or reclined more than 45 degrees from being upright (heatsink on top).
- Operate the PS020A DMX-controlled 3-Channel power supply in any closed
environment smaller than 10cbm, unless forced air convection is provided.
To Next Page
Loading...