Image 2
CÂMERA
To use the camera simply tap the Camera icon, , to select the
camcorder mode, change the mode to Camcorder on the icon on the right
side of the screen, to take a photo or start recording, tap the circle on the
side of the screen, the pictures were stored in the internal memory device
and can be accessed through the application Gallery. .
3G CONNECTION (EXTERNAL)
The Tablet supports 3G modem, so you can use a mobile phone sim
card with 3G data plan to surf the internet when out of range of a Wi-Fi
network.
To make the connection, turn off Wi-Fi on the settings menu, then turn off
the tablet and follow instructions below with the tablet off.
Make sure that the 3G modem is compatible with this tablet, then insert
a SIM card with data plan on 3G modem.
The connection may be interrupted if the
tablet comes into Stand By mode.
•To avoid this, increase the
Standby time of you device.
•Click Menu> Settings> Dis-
play> Sleep, and then select
the desired time.
(It is desirable to select
30min. If you want to put
the device in Stand By mode
at any time, you can do so
by pressing the On. / Off.,
Located on the side of the
tablet.)
Turn off Wi-fi connection
Image 1
Insert the SIM Card
on the 3G Modem
Acquire an USB OTG adaptor with the input as shown in the Image 1 to
connect the modem on the tablet, then isert the the OTG in the Mini Usb
input, image 2.
Wait for a few seconds until the device recognizes the 3G modem and
your operator network. The connection may be concluded as soon as the
icon appears at the right bottom side of the sreen.
The connection time may be extended for few a minutes, it depends on
your operator signal intensity.
In case the connection does not occur automatically, go to menu
Settings>More…>Mobile Network Settings> Access Point Names, then
choose the first option. After this procedure your tablet will be ready to
surf the internet.
*Modelo de modem compatíveis: Huawei E303, E173-s1, E173-s3 e Olicard 160
WARRANTY TERMS
This warranty does not cover any deffect for bad use or natural wear, or
even IF it is not used according to our guidelines.
This warranty does not cover any deffct caused by use of non original or
non compatible peripherals and third party software installation.
In case this product has a factory defect, since you can prove it, Multilaser
is compromises to fix it or replace your product.
The below cases are not covered by this warranty:
•Natural use
•Damages caused by liquids, high temperature (Hot or cold)
•Oxidation or fungus
•Shocks
•Impacts
•Damages caused t LCD because of bad use, pressing, shock or hu-
midity
This product is warranty covered for the period of 12 months and the
accessories that are included in this kit are covered for 3 months from
the acquisition day on.
This certified is only valid under the
presentation of the purchase receipt.
SAC: www. r
To Next Page
Need help?
General
