113
www.multilaser.com.br
NAME STATUS INDICATION
POWER
Off Power is off.
On Power is on.
SYSTEM
On The Router is initializing.
Flashing The Router is working properly.
Off The Router has a system error.
WLAN
Off The Wireless function is disabled.
Flashing The Wireless function is enabled.
WAN,
LAN (1-4)
Off There is no device linked to the corresponding port.
On
There is a device linked to the corresponding port but
there is no activity.
Flashing
There is an active device linked to the corresponding
port.
WPS
Slow Flash
A wireless device is connecting to the network by WPS
function. This process will last for about 2 minutes.
On
A wireless device has been successfully added to the
network by WPS function. The LED will keep on for
about 5 minutes.
Quick Flash
A wireless device failed to be added to the network by
WPS function.
Table 1-1 The LEDs Description
Note:
After a device is successfully added to the network by WPS function, the WPS LED will keep on for about 5 minutes and
then turn off.
To Next Page
Loading...