150
www.multilaser.com.br
• Radius
Server IP - Enter the IP address of the Radius server.
• Radius Port - Enter the port number of the Radius server.
• Radius Password - Enter the password for the Radius server.
• Group Key Update Period - Specify the group key update interval in seconds. The value should be 30 or above. Enter
0 to disable the update.
• WPA-PSK/WPA2-PSK – It’s the WPA/WPA2 authentication type based on pre-shared passphrase.
• Version – you can choose the version of the WPA-PSK security on the drop-down list. The default setting is Automatic,
which can select WPA-PSK (Pre-shared key of WPA) or WPA2-PSK (Pre-shared key of WPA) automatically based on
the wireless station’s capability and request.
• Encryption – When WPA-PSK or WPA is set as the Authentication Type, you can select either Automatic, or TKIP
or AES as Encryption.
Note:
If you check the WPA/WPA2 radio button and choose TKIP encryption, you will find a notice in red as shown in Figure 4-21.
• PSK Passphrase – You can enter a Passphrase between 8 and 63 characters.
Figure 4-20
Figure 4-21
To Next Page
Loading...