201
www.multilaser.com.br
Note:
Your opposite side should call your WAN IP, which is displayed on the “Status” page.
4) How to enable DMZ Host: Log in to the Router, click the “Forwarding” menu on the left of your browser, and click “DMZ”
submenu. On the “DMZ” page, click Enable radio button and type your IP address into the “DMZ Host IP Address” field, using
192.168.1.169 as an example, remember to click the Save button.
5) How to enable H323 ALG: Log in to the Router, click the “Security” menu on the left of your browser, and click “Basic
Security” submenu. On the “Basic Security” page, check the Enable radio button next to H323 ALG. Remember to click the
Save button.
Figure A-5 Add or Modify a Virtual server Entry
Figure A-6 DMZ
To Next Page
Loading...