The Mulmac is upholstered in ‘regular’ car fabrics, and can be cleaned either with warm
soapy water, or any proprietary upholstery cleaner, taking care to read the instrucons and
ensure that they do not contain any chemical which could be irritant to a child’s skin.
The Minimac cover can be put in the washing machine at a low temperature.
HARNESS
If the harness becomes dirty this can be cleaned with warm soapy water – do not use any
chemical cleaners as they could weaken the harness.
If the harness becomes frayed or damaged please contact Mulmac for a replacement.
REMOVING THE MINIMAC COVER
It is held on with Velcro strips underneath the seat.
You will need to remove the carry handles and harness too – the handles are on a metal
‘3 bar’ which pops through the slot in the metal frame. There is a metal yolk holding the
harness together which need to be unthreaded and this can be found through the back zip.
The Aluminium construcon of the Minimac will ensure that it has a long life and may
be used for successive babies so we recommend that aer a couple of years of washing,
the cover be replaced with a new one – available from the website.
PUTTING THE MULTIMAC BACK IN
9
CLEANING AND MAINTENANCE
EVERYTHING ON THE MULTIMAC
AND MINIMAC IS REPLACEABLE
AND ALL PARTS CAN BE BOUGHT
VIA THE ‘SPARE PARTS’ PAGE ON
THE WEBSITE
1368_Multimac_A5_Users Manual 2024_V5.indd 91368_Multimac_A5_Users Manual 2024_V5.indd 9 16/05/2024 15:2216/05/2024 15:22
To Next Page
Loading...