Need help?Do you have a question about the MULTIPLEX modell HIMAX C 3528-0800 and is the answer not in the manual?
General| RPM/V | 800 |
|---|---|
| Kv Rating | 800 |
| Type | Brushless Outrunner |
| Shaft Diameter | 5 mm |
| Dimensions (Diameter x Length) | 35mm x 28mm |
Use sensorless speed controllers. Reverse motor rotation by swapping wires. Do not shorten motor wires or alter connectors.
Ensure adequate cooling. Do not dismantle the motor. Handle with care to avoid injury.
Reverse the motor shaft by removing grubscrews, pressing out the shaft, and reassembling with adhesive.
Protect motor and bearings from dust. Lubricate bearings regularly with thin oil. Avoid water or solvents.
Design power systems based on model type and weight. Calculate required power and current using voltage.
Start with graph data. Try various propellers for optimum combination. Stay within max motor speed.
Covers statutory defects. Excludes damage from incorrect handling, modifications, or overheating.
Product satisfies relevant EG directives for EMV, 91/263/EWG, and 92/31/EWG.
Dispose of electrical equipment via specialist systems, not household waste, as per WEEE directive.
To Next Page
