Multiplex ICECORETM 30 - Setting Outputs without Countdown; Parameter Options Table

TABLE 1
PARAMETER OPTIONS DEFAULT VALUE SET POINT ADJUSTMENT RANGE
H.RECIRC: 6°C 6°C 4°C to 10°C in 1°
FRIDGE HI.: 60°C 60° 60°°C in 1°
CLEAN COND: 50°C
50°
50°
°
°C 3°C 3°C to 10°°











0 or 1


Unit ID Number.: XXXX XXXX 



 
7. SET OUTPUTS SCREEN: (without countdown or suspended outputs)

CARB. A
RECIRC. A
COMPRESSOR. A
User Interaction:


POWER UP:
 
 
 

HOME PAGE.
15
Section 2
SET:
= Output
0=o 1=on
CARB.A: 1