Need help?Do you have a question about the Multitech MultiConnect eCell and is the answer not in the manual?
General| Brand | Multitech |
|---|---|
| Model | MultiConnect eCell |
| Category | Network Hardware |
| Language | English |
Overview of the MultiConnect eCell as an affordable 3G/4G Ethernet to Cellular Bridge.
Lists the items included in the package with quantities.
Details network and browser requirements for using the device.
Explains the meaning of different LED states on the device.
Covers general performance, frequency bands, radio specs, and 4G LTE speed.
Details connectors, power requirements, physical dimensions, weight, and environmental operating conditions.
Lists compliance certifications (CE, FCC, etc.) and the warranty period.
Step-by-step instructions for installing the SIM card into the device.
Guide on connecting antennas and Ethernet cables, and powering up the device.
Detailed steps for configuring the device using the web UI setup wizard.
Configuration options for setting up the 3G/4G WAN connection and internet access.
Configuration for the Ethernet LAN port, including site name, IP address, and subnet mask.
Explanation and configuration of Network Address Translation (NAT) for sharing a cellular connection.
How to enable routing for communication between different subnets.
Setting up static routing rules to define outgoing data paths.
Configuration for Dynamic Domain Name Service to host servers on changing IP addresses.
Setting up the gateway as a DHCP server to assign IP addresses to LAN devices.
Instructions for signing up and setting up MTE to communicate with DeviceHQ for management.
Covers uploading new firmware and pushing updates to devices via DeviceHQ.
Instructions for setting up and deploying configuration files using DeviceHQ.
Procedures for requesting device logs and scheduling reboots through DeviceHQ.
Settings for advanced network features like firewall, stealth mode, SPI, and PING discard.
Options to enable or disable the firewall for network protection.
Configure Stealth Mode and Stateful Packet Inspection for enhanced security.
Configure the gateway to ignore ICMP request packets from the WAN side.
Covers system logs, status, and general information display.
Procedures for changing passwords and managing web UI/CLI access.
Access to firmware updates, reboots, resets, and configuration backups.
Enables setting up schedules for automated system tasks like reboots or connectivity.
Configuration for adding and setting up an external syslog server for logging.
Caution regarding connecting Ethernet ports to public telecommunication networks.
Safety advice regarding RF interference and general usage precautions.
Information and precautions regarding potential interference with pacemakers and other medical devices.
FCC regulations regarding interference and compliance for Class B digital devices.
Industry Canada regulations and compliance statements for Class B digital apparatus.
Confirmation of compliance with EU directive 2011/65/EU regarding hazardous substances.
Information about the WEEE Directive and its implications for product disposal.
Guidance for users on the proper disposal of waste electrical and electronic equipment in the EU.
Requirements related to the PTCRB certification, specifically concerning antenna systems.
Declaration of the product's compliance with essential requirements of EU directives on EMC, Safety, and RED.
To Next Page
