WELCOME
MultiConnect
®
eCell User Guide 5
Chapter 1 – Welcome
Product Overview
The Multiconnect eCell is an affordable 3G/4G Ethernet to Cellular Bridge used to enable devices with Internet
service. It is a simple alternative to complex and expensive cellular routers in applications where advanced
networking capabilities are already in place or are not required, but there is a need for remote access without
using local wired networks
Package Contents
Description Quantity
MultiConnect eCell 1
Antenna 2
Mag Mount Adapter (EU SKU Only)
Power Adapter 1
Ethernet Cable 1
Four Rubber Feet 1
Mounting Stick 1
Quick Start 1
System Requirements
Network Requirements An external Ethernet device
3G/4G cellular service subscription
Ethernet connection
Configuration Requirements Browser Requirements
Internet Explorer 9.0 or higher
Chrome 2.0 or higher
Firefox 3.0 or higher
Safari 3.0 or higher
LED Indicators
Item Description
Power On: Solid when the device is in normal operational mode.
Off: No power.
Flashing: Device is in firmware upgrade mode, recovery mode,or
needs troubleshooting.
To Next Page
Loading...