MUNBYN IPDA030 - Page 13

UHF (optional)
UHF RFID reading area
Step2:Power on
Warm tips: UHF RFID is optional function. Please make sure the PDA is
equipped with UHF RFID function before using it.
Step1:Connect MCU
Step3:Start Inventory
If your PDA is equipped with the function of UHF RFID, you can test the NHF
with our demo app:
1.Please open the APP of UHF.( As Pic 1)
2.In the Interface of UHF, please read the card in UHF reading area.
( As Pic 1)