How to install ITP01 printer on a computer ?
For Windows computer
Preparation
Replace Paper
Open The Cover
Open the paper compartment cover and load paper correctly.
1)
1 Put Paper
2
Close The Cover
3
Press and hold the power button for 2 seconds to turn on the printer
2)
1
2
3
Unplug the USB-A to typC adapter, and use the
USB cable to connect to a Windows computer.
1.1
1.2 Driver installation
Download link: munbyn.biz/A4Drivers
Overview1)
*Notice
Notice:If the printer cannot be found when installing the driver,
it means that the USB cable is in poor contact, and you need to
unplug and plug the USB cable again.
Open the PDF file, using Adobe
acrobat reader as an example, select
the corresponding parameters to
print, if there is a size option, please
choose A4 size.
2)
Start to print1.3
Demo video link:
munbyn.biz/A4WindowsV
To Next Page
Need help?
General