Munchkin STEP - Installing the Puck; Installing the Refill

4 5
How to Install
Important Information
GETTING STARTED
Thank you for choosing Munchkin!
Your premium diaper pail features the odor-ghting power of Arm & Hammer™ baking soda, as well as
self-sealing technology that prevents odors from seeping out.
This pail has been designed to accommodate Arm & Hammer™ Snap, Seal & Toss
TM
bags, as well as
rell rings from Arm & Hammer™, Nursery Fresh®, Up & Up® and Comforts for Baby
TM
.
Enjoy keeping your nursery smelling fresh! Simply install the lavender scent baking soda PUCK
TM
, as
well as starter ring or Snap, Seal & Toss
TM
bag, to get started.
WARNING: Clean and inspect before use. This is not a toy; for adult use only.
INSTALLING THE PUCK
1 2 3
Mount the Arm & Hammer™
PUCK™ into the bracket on the
underside of the lid.
Turn clockwise to lock into
position.
Turn counter-clockwise to
remove.
Replace the puck every 60 to 90 days for maximum odor protection.
INSTALLING THE REFILL
1 2
1. OPEN THE FRONT DOOR:
Press the button on the silver
inner lid and swing the front
door open from the le side.
2. THEN LIFT THE SILVER INNER
LID: Press the release button
just beneath the inner lid and
li it up.
Release
Button