How To Install How To Install
7
3. Place the ring inside the opening with
the tabs lined up with the grooves, so
that the ring locks into place.
4. Pull the bag all the way down with at
least 3 inches resting on the bottom.
3 4
TO REMOVE THE BAG WHEN FULL:
Open the front door and slide the top
of the bag through the cutter located
beneath the inner lid. Tie a knot to close
the bag and discard.
Pull the remaining material down and tie
a knot at the bottom to create another
bag. At least 3 inches should rest on the
oor of the pail.
NOTE: For best results, empty the diaper
pail regularly and keep clean.
To Next Page
Loading...
