Munchkin STEP - Installing the Refill; Diaper Pail Refill Rings

How To Install
6
Release
Button
INSTALLING THE REFILL
1. OPEN THE FRONT DOOR: Press the
button on the silver inner lid and swing
the front door open from the left side.
2. THEN LIFT THE SILVER INNER LID:
Press the release button just beneath
the inner lid and lift it up.
1
2
1. Pull lm out of cartridge, then down
through the center opening of the
rell ring.
2. Tie a knot at the end to create a bag
and feed it through the sealing aps.
1
2
FOR DIAPER PAIL REFILL RINGS