Need help?Do you have a question about the mundoclima MU-WZ Series and is the answer not in the manual?
General| Refrigerant | R32 |
|---|---|
| Series | MU-WZ |
| Brand | Mundoclima |
| Category | Air Conditioner |
| Type | Wall-mounted |
| Functions | Cooling & Heating |
Details the procedure for packing the air conditioner unit for transport.
Certificate confirming compliance with Electromagnetic Compatibility directives.
Certificate confirming compliance with Low Voltage Directive requirements.
Verification of product declarations for compliance with RoHS restrictions.
Exploded diagram illustrating all components of the WZ-32 model.
Graphical representation of cooling performance under specific test conditions.
Graphical data for heating pump performance under various test conditions.
Details indoor noise levels during fan operation across different speeds and frequencies.
Details indoor noise levels during cooling and heating modes across different speeds.
Details outdoor noise levels during cooling and heating modes across different speeds.
Guidelines for correctly placing the air conditioner on an exterior wall for optimal performance.
Instructions for using the paper template to mark drilling points accurately.
Procedures for drilling intake and outlet holes with specific diameter and inclination.
Details two systems for draining condensate moisture, ensuring proper gravity flow.
Steps for securely anchoring the bracket to the wall using provided or extra bolts.
Guidance on rolling and fitting plastic sheets for pipes through wall holes.
Instructions for installing the air intake and discharge gratings onto the unit's tubes.
Procedures for lifting and securely attaching the air conditioner to its wall bracket.
Specifications for the PCB, including receiver distance, temperature/time accuracy.
Definitions of terms like RT, IPT, ST, OPT, and PTC data used in the manual.
Overview of different operating modes like Auto, Cooling, Dehumidify, Heating, Fan, and Sleeping.
Details compressor and fan working conditions, setting temperature, and fan speed control.
Explains working conditions for dehumidify mode, including fan speed and temperature checks.
Describes compressor, fan, and four-way valve operation in heating mode, including anti-cold function.
Details conditions, procedures, and relieving criteria for the defrost cycle in heating mode.
Explains auto and manual auxiliary electrical heater operation and overheat protection.
Describes compressor, valve, and fan operation when only the fan mode is selected.
Details how the unit operates in sleeping mode during cooling and heating for energy saving.
Instructions on setting timer ON and OFF functions using the remote control.
Describes the function of the emergency button for auto-running and unit control.
How the flap panel movement is controlled by the step motor.
Explains compressor delay, anti-frozen, and overheat protection mechanisms.
Details error codes and unit behavior when room or coil temperature sensors are damaged.
Explains the protection triggered by issues with the indoor fan motor's speed feedback.
Protection mechanism activated when refrigerant levels are insufficient, indicated by error code E4.
Lists error codes displayed for various component failures, their flash patterns, and meanings.
Explains how pressing specific buttons simultaneously affects the outdoor fan speed for noise reduction.
Lists the operating speeds (rpm) for cooling and heating modes.
Steps for cleaning the air conditioner filters every two weeks to ensure efficiency.
Guidelines for cleaning the unit's exterior using a damp cloth, avoiding abrasives.
Information on the active carbon filter's function and replacement advice every three months.
Notes the position of the electrical heater and warns against touching it.
To Next Page
