Munters EM50 - Page 9

© Munters AB, 2018
9
7.8
WATERPROOF DISTANCE PIECE
Purpose: to distance the hub from the propeller central support.
1
7.9
HEXAGON SCREW M6X16 UNI 5739
CENTRAL SHUTTER BLADE FORK
HEXAGON NUT M6X5 UNI 5588
Purpose: to fix the central shutter blade fork to the central shutter
blade.
2
1
2
7.10
THIN HEXAGON NUT M25X10 UNI 5589
CUP COVER NUT
Purpose: to fix the hub to the propeller central support.
1
1
7.11
SPRING HOOK
Purpose: to fix the two springs of central shutter blade to the side
panel.
2
7.12
KNURLED AXLE D6X33
Purpose: to fix the tie-rod to the central shutter blade fork.
1
7.13
SELF TAPPING SCREW 6.3X19
PLAIN WASHER D6.7X24 UNI 659
Purpose: for cover plate and wire meshes assembling.
15
1
7.14
PLASTIC CLIP MESHES
Purpose: to fix the safety meshes to the housing.
4
7.1
5
RUBBER GROMMET
Purpose: to protect the electric cable on the side panel in
correspondence with the motor slot.
1
Spare part listChapter1