Murray 22" Push - GRASS BAG ASSEMBLY AND MOUNTING

PREPARATION
13
F-030426L
MODELS WITH OPTIONAL GRASS BAG
HOW TO ASSEMBLE THE GRASS BAG
1. Slide the frame assembly into the ends of
the support tube (Figure 8).
2. Make sure the handle is on the outside of
the grass bag (Figure 9).
3. Attach the clips to the frame assembly
(Figure 9).
4. Close the top cover. When operating the
mower with the grass bag, the top cover
must be in the closed operating position
(Figure 10).
Figure 8
Support Tube
Frame Assembly
Figure 9
Clips
Frame
Assembly
Handle
Figure 10
Top
Cover