Do you have a question about the Murray 385011x50A and is the answer not in the manual?
Engine | Briggs & Stratton |
---|---|
Cutting Positions | 6 |
Mulching Capability | Yes |
Side Discharge Capability | Yes |
Engine Type | 4-Cycle |
Cutting Height | 1.5-4 inches |
Drive Type | Rear-Wheel Drive |
Pictorials indicating safety warnings and precautions.
Pictorials illustrating controls and operating functions.
Defines the owner's duties and responsibilities for safe operation.
Emphasizes reading instructions and familiarizing with controls.
Steps to prepare the machine and work area before operation.
Guide for mounting the front wheels onto the tractor.
Importance and procedure for checking tyre pressure.
How to ensure the mower housing is set to the correct cutting height.
Instructions for mounting the operator's seat.
Steps to assemble the steering wheel onto the steering post.
Information and procedures for installing, charging, and maintaining the battery.
Identification and function of all unit controls.
Information on using various attachments with the unit.
How to adjust engine speed using the throttle control lever.
How to engage and disengage the blade rotation.
How to change forward speed and direction of the unit.
How to engage and disengage the parking brake lever.
How to adjust the mower housing height using the lift lever.
Procedure for safely stopping the engine and unit.
Steps to follow when transporting the riding mower.
Guidelines for operating the mower with the cutting deck attached.
Safety precautions and procedures for operating on slopes.
Procedure for checking the engine oil level before starting.
Safety precautions and procedure for adding fuel to the tank.
Step-by-step guide to starting the engine correctly.
Advice for optimal mowing and grass bagging performance.
Guidance on inspecting, removing, installing, and adjusting the mower blade.
Procedures for adjusting the blade rotation control, shift lever, clutch, and drive brake.
Steps for removing, charging, and maintaining the battery.
How to ensure the mower housing is properly leveled for cutting.
Instructions for lubricating various parts of the mower.
Checking and maintaining correct tyre air pressure.
Procedures for replacing motion and mower drive belts.
Guide on how to detach the mower housing from the unit.
Instructions for replacing fuses and preparing the unit for storage.
Information on how to order necessary replacement parts.
Solutions for problems like engine not starting, turning over, or running rough.
Diagnosing power loss, stopping on slopes, or not idling.
Troubleshooting for vibration, incorrect discharge, or unlevel cutting.
Solutions for drive problems, belt noise, wheel spin, and shifting issues.
Official statement of compliance with EU directives for the product.