HOME CONTROL
The Musaic Players and apps are able to control
lighting systems from LightwaveRF and Philips
Hue. Compatibility with further systems will
be announced soon. Go to www.musaic.com
to see the latest list of compatible devices. A
downloadable ‘Guide to the setup of Home
Control’ is available via the Musaic website at
www.musaic.com.
With compatible systems the Musaic Players can
turn on and o your lights, raise and lower their
levels and set and recall lighting scenes/moods
(i.e. saved settings for multiple lights) all from
the top panel buttons or the Musaic apps. These
are accessed by tapping the Lighting/Home
Control button, the LED lights up to show Home
Control mode is active.
The preset buttons (1–4) perform scene/
mood recall, the X button performs O, - and
+ perform raise/lower and The Standby/On
button performs On. The Home Control mode
automatically cancels itself after no activity for
six seconds.
You can also assign a lighting scene/mood to
your wake-up alarm with a slow turn on time so
that you are gently woken by the lights coming
up and an Internet Radio starting to play.
More features will be announced as they become
available. See the ‘Guide to the setup of Home
Control’ for details of the current options.
RESETTING TO FACTORY
DEFAULTS
WARNING! This will clear the saved network
information and the paired Bluetooth devices
list, reset the name of the unit and change
the Internet Radio presets back to the factory
defined settings.
To reset your Musaic Player back to its factory
defaults follow the steps below:
1. Turn On the unit as usual.
2. Press and hold the Reset button on the back
panel for fifteen seconds.
The Player will now restore the factory settings
and power o before powering back up in a
default state. All Internet Radio presets will be
set to their defaults and all settings reset.
This will take approximately 60 seconds. You
will then need to connect the Player to your
network. See the connections section at the
start of this manual.
23
To Next Page
Loading...