Muscle Rack UR361860PB4P-SV

To Next Page

MODEL:

UR361860PB4P-SV

(D) Wood Shelf

(A) Post

(B) Brace

4-SHELF Boltless Steel Shelving

with parcleboard shelves

36W x 18D x 60H”

Should you have any comments, damage, missing parts, or problems with assembly of this unit contact us:

Chat: www.edsal.com/chat or www.edsal.com/contact

Email: support@edsal.com

Phone: 773-475-3131

To obtain replacement parts please provide: Model Number, Part Number & Description,

Location Purchased, and Date Purchased

Edsal Manufacturing Co. LLC

Chicago, IL 60609

US Patents & Patents Pending

Rev: C063020

(E) Post Joint

PARTS LIST

Descripon Qty Part Number

(A) Post 8 URPS30-SV

(B) Brace 8 URBR18-SV

(D) Wood Shelf 4 RPB31836

(E) Post Joint 4 MPC0409-SV

(F) Post Cap 8 RL-PC-B1.4

IMPORTANT SAFETY INFORMATION

Read through this enre manual for important guidelines and instrucons prior to assembly. Failure to follow these guidelines and

instrucons can result in property damage or serious personal injuries.

This unit should be placed on a level surface. Failure to do so can result in poor product performance or create a possible safety haz-

ard. DO NOT CLIMB, STAND or USE THIS UNIT AS A LADDER. TO PREVENT TIPPING, ALWAYS SECURE TO A WALL WITH SUITABLE FAS-

TENERS, NOT INCLUDED. DO NOT USE THIS UNIT TO STORE AQUARIUMS. CAUTION: CONTAINS SMALL PARTS, KEEP CHILDREN AWAY

DURING INSTALLATION. USE TWO OR MORE PEOPLE TO ASSEMBLE AND MOVE THE UNIT TO AVOID INJURY. Do not use this unit for

anything other than the manufacturer’s intended purpose. Use care when working with metal parts, wear gloves for protecon. Pe-

riodically inspect the unit to ensure brace/beam rivets are properly seated into post slots. Keep this manual for future reference.

Do not exceed the maximum weight capacity of 800 lbs (363 kg) for each shelf, not to exceed 4,000 lbs (1,814 kg) for the enre

shelving unit. Evenly distribute weight loads across enre shelf surface. Always store larger, heavier items on the boom levels and

small lighter items on the upper levels.

Assembly is done with the rivets of the beams and braces ng into the slots of the post. A rubber mallet may be used on the

beams and braces to seat the rivets properly. A hammer can also be used, providing one uses a cloth or a block of wood between

the hammer head and the parts to prevent damage. Tap gently and be sure the rivets are straight and fully engaged.

GENERAL INSTRUCTIONS

PARTS

(F) Post Cap

Need help?

Do you have a question about the Muscle Rack UR361860PB4P-SV and is the answer not in the manual?

This document describes the 4-SHELF Boltless Steel Shelving unit with particleboard shelves, model UR361860PB4P-SV, manufactured by Edsal Manufacturing Co. LLC.

Function Description

The shelving unit is designed for storage, providing four levels of shelving. It is a boltless system, meaning assembly primarily involves fitting rivets into slots, often aided by a rubber mallet or hammer. The unit is intended for general storage purposes and is not suitable for storing aquariums.

Important Technical Specifications

Dimensions: 36 inches (W) x 18 inches (D) x 60 inches (H).
Shelf Material: Particleboard.
Frame Material: Steel (boltless design).
Weight Capacity:
- Per Shelf: 800 lbs (363 kg) maximum.
- Entire Unit: 4,000 lbs (1,814 kg) maximum.
Number of Shelves: 4.
Parts List:
- (A) Post: 8 pieces (Part Number: URPS30-SV)
- (B) Brace: 8 pieces (Part Number: URBR18-SV)
- (C) Beam: 8 pieces (Part Number: URBM36-SV)
- (D) Wood Shelf: 4 pieces (Part Number: RPB31836)
- (E) Post Joint: 4 pieces (Part Number: MPC0409-SV)
- (F) Post Cap: 8 pieces (Part Number: RL-PC-B1.4)

Usage Features

Boltless Assembly: The design simplifies assembly, relying on rivets fitting into post slots. A rubber mallet or a hammer (with a cloth or wood block to prevent damage) can be used to seat the rivets properly.
Adjustable Shelf Levels: The design allows for flexibility in placing shelves at desired heights along the posts, accommodating various item sizes.
Directional Posts: Posts are directional, with the narrow end of the slots needing to point downwards during assembly to ensure proper engagement of rivets.
Weight Distribution: It is crucial to evenly distribute weight loads across the entire shelf surface to maintain stability and prevent damage.
Storage Recommendation: Larger, heavier items should be stored on the bottom levels, while smaller, lighter items should be placed on the upper levels to enhance stability.
Safety Features:
- Level Surface Requirement: The unit must be placed on a level surface to prevent poor performance or safety hazards.
- Wall Securing: To prevent tipping, the unit should always be secured to a wall using suitable fasteners (not included).
- No Climbing/Standing: Users are explicitly warned not to climb, stand on, or use the unit as a ladder.
- Child Safety: The unit contains small parts, and children should be kept away during installation.
- Two-Person Assembly: Two or more people are recommended for assembly and moving the unit to avoid injury.
- Intended Use: The unit should only be used for its manufacturer's intended purpose.
- Protective Gear: Users are advised to wear gloves for protection when working with metal parts.

Maintenance Features

Periodic Inspection: The unit should be periodically inspected to ensure that all brace/beam rivets are properly seated into the post slots.
Manual Retention: The manual should be kept for future reference, likely for assembly instructions, parts identification, and safety guidelines.
Contact for Support: In case of comments, damage, missing parts, or assembly problems, users can contact Edsal Manufacturing Co. LLC via:
- Chat: www.edsal.com/chat or www.edsal.com/contact
- Email: support@edsal.com
- Phone: 773-475-3131
Replacement Parts: When requesting replacement parts, users should provide the Model Number, Part Number & Description, Location Purchased, and Date Purchased.