Need help?Do you have a question about the Music Man RD-50 Series and is the answer not in the manual?
General| Type | Tube Guitar Amplifier |
|---|---|
| Power Output | 50 Watts |
| Channels | 2 |
| Controls | Volume, Treble, Middle, Bass, Presence |
| Outputs | 1 x 1/4" Speaker Out |
| Speaker | 1 x 12" |
| EQ | 3-Band (Treble, Middle, Bass) |
| Inputs | 2 x 1/4" (High and Low) |
Details the state-of-the-art vacuum tube design, reverb, and switchable distortion stages.
Lists key technical details including weight, power output, impedance, and tone control frequencies.
Covers input jack, bright switch, volume, treble, and bass for the clean mode.
Details volume, treble, bass, and gain for the limiter/distortion stage.
Explains reverb adjustment and the main power on/off switch with indicator.
Describes AC socket for accessories and the protective fuse and thermal breaker.
Explains the three-position ground switch for eliminating AC buzz.
Details the main speaker output and external speaker jack for connecting loads.
Describes the line out jack for recording or slaving amplifiers.
Details the reverb and distortion footswitch functions and LED indicator.
Provides instructions for connecting the optional footswitch accessory.
Illustrates the internal signal path and components of the amplifier.
Offers recommendations for replacing vacuum tubes to maintain performance.
To Next Page