Mustang One-piece Seat User Manual

14 800‐243‐1392413‐668‐1100 HandcraftedintheUSA   mustangseats.com

ThesestepsareguidelinestohelpyouinstallyournewMustang
product.Ifyouneedfurtherassistance,pleasecallusat800‐243‐1392
or413‐668‐1100,MondaythroughFriday9:00‐5:30Easternorsend
ane‐mailtoquestions@mustangseats.comorvisitourwebsiteat
www.mustangseats.com.

Forcareandmaintenanceofourseats,pleasegotoourwebsite
under"Support".

Referstopartnumber:75690 

Yamaha
Bolt 2013-2018
One-piece Seat
Hardware: Rearmountingbracket
Toolsneeded: 10mmsocketwrench
4mmAllenwrench
RemovalofStockSeat:




1.Inserttheignitionkey
intotheleftsidepanel
belowtheseat.Turnthe
keyclockwiseandgently
pullthepanel'splunger
pinoutofthebodyto
removethepanel.

2.Usinga10mmsocket
wrench,removethebolt
whichsecuresthe
forwardseatbracket
fromtheframe.


3.Liftthenoseoftheseatandslideforwardtoremovethesoloseat.


Mustang One-piece Seat Specifications

General

Type	One-piece Seat
Mounting Type	Bolt-on
Material	Vinyl
Color	Black
Compatibility	Specific to Harley-Davidson models

Summary

Mounting Suggestions and Stock Seat Removal

Hardware and Tools Required

Lists necessary hardware (rear mounting bracket) and tools (10mm socket wrench, 4mm Allen wrench).

Steps for Removing the Stock Seat

Step-by-step guide on how to remove the original motorcycle seat from the frame.

Installing the Mustang Seat

Prepare Fender for Bracket Installation

Remove the two rearmost Allen bolts from the fender using a 4mm Allen wrench.

Attach Rear Mounting Bracket

Secure the supplied rear mounting bracket to the fender using the stock bolts.

Position and Secure Mustang Seat

Slide the seat back, engaging the rear bracket, and lower the nose into place.

Re-install Frame Bolt

Re-install and secure the stock bolt into the frame with a 10mm socket wrench.

Replace Side Panel

Replace the left side panel and secure by turning the ignition key counter-clockwise.