24
CONTENTS
Software Installation
Windows 95/NT 4.0/98
Windows 98 User’s Note: For Plug n’ Play installation, please refer
to the following:
1. After connecting the camera to the PC using the USB cable, a
warning will appear.
2. Insert the Installation CD when prompted (asked for a driver),
and continue to follow all on-screen instructions.
2. Click on Start and select Run.
1. Insert the installation CD into
your CD-ROM drive.
3. In the Run dialog box,
type “drive:\run.exe”
where drive is your CD-
ROM drive and click
OK.
4. Follow the on-screen instructions.
Transferring Images to the PC
Once you have installed all of the required software (described in
the previous chapter) and have captured images, you will want to
connect your camera to the PC so that you can transfer your images
for editing or storing.
Note: Connecting the camera to the computer renders the camera
buttons inoperable. However, several functions can be controlled
through the Control Panel as described later in this chapter.
Transferring Images to the PC
The images will be transferred from one of these sources:
1. The internal memory (default)
2. The CF card
3. A PCMCIA CF card reader
To transfer images to the PC, please refer to the next section “Ac-
quiring the Camera Software” for instructions.
To Next Page
Loading...
