12
carseat and the pushbar to avoid the risk of head entrapment.
· Make sure the pushbar is not in lowest position
· Place the height limiters hard part (X1) on the inside of the pushbar
tube with the velcro facing inside.
· Strap the fabric around the pushbar and close the velcro.
Place the Maxi-Cosi car seat on the adapters
· Orientate the Maxi-Cosi car seat such that it is directed rearwards on
the frame.
· Hold the Maxi-Cosi car seat with the central hinge points of the sup
-
port bar directly above the adapters.
· Lower the Maxi-Cosi car seat and press solidly into the adapters until
you hear a click. Check that the Maxi-Cosi car seat has been placed
horizontally and has been attached properly by trying to lift it from
the frame.
Remove the Maxi-Cosi car seat from the adapters
· Operate the unlocking system of the Maxi-Cosi car seat.
· Lift the Maxi-Cosi car seat straight up from the frame.
Remove the Maxi-Cosi adapters from the frame (z)
· Press the release button (z1) on the adapter. Turn the top of the adapter
outwards (z2) and take the adapter out of the cam from the top. (z3)
To Next Page
Loading...
