Need help?Do you have a question about the Mutsy EVO and is the answer not in the manual?
Regularly check the frame's locking mechanism and apply Teflon spray for smooth operation.
Clean and lubricate wheel axles with acid-free vaseline for smooth running. Do not use oil.
Check and maintain air pressure in tyres, not exceeding 16 PSI/1.1 bars.
Unlock and unfold frame, assemble wheels, and attach carry cot or seat.
Defines front, rear, left, and right from the perspective of the user walking behind the stroller.
Steps to unfold the frame by pushing locks and lifting the top part.
Instructions to fold the frame by lowering the push bar and pushing the top part down.
Push the button and slide the rear wheel axle into housing until it clicks.
Push the button on the outside of the rear wheel and pull it from the housing.
Slide the front wheel axle upwards until it clicks, then pull to check attachment.
Push the button on the front of the wheel and pull it from the housing.
Turn the ring above the front wheel inwards to lock, outwards to unlock swivelling wheels.
Push the pedal downwards to block the brake, push upwards to unblock.
Adjustable push bar with 4 height positions. Push buttons and turn to adjust.
Attach adapters to frame, ensuring they are vertical. 'R' on right, 'L' on left.
Orientate cot rearwards, align handles with adapters, press until clicks on both sides.
Hold cot, press unlock buttons, lift vertically from adapters.
Pull unlock buttons upwards and vertically remove adapters from attachment points.
Place rain cover over cot, ensuring it attaches well around the bottom.
Suitable for children 6 months to 25 kg who can sit independently. Foldable with frame.
Attach seat to frame in either direction by aligning unlock buttons and pushing down.
Hold seat at unlock buttons, pull buttons upwards, and lift seat vertically.
Fold frame with seat by lowering push bar, pulling frame unlock buttons, and pushing top.
Pull button upwards to adjust back support through 4 positions, release to lock.
Make seat suitable for newborns. Put leg rest high, backrest reclined, attach press studs.
Lift leg support upwards, or push buttons and push downwards to lower it.
Push bumper bar ends into notches until click. Press unlock buttons to remove.
Adjust hood by moving front bar. Open/close zipper to enlarge/reduce hood.
Zipper creates higher footrest. Child can use aluminium bar or plastic foot rest.
Place rain cover over seat, ensuring it attaches well behind back support and over leg support.
Position child correctly, ensure belts are over shoulders and hips. Adjust length and position.
Attach adapters to frame, ensuring they are vertical. 'R' on right, 'L' on left.
Orientate car seat rearwards, align hinge points with adapters, press until click.
Operate unlocking system, lift car seat straight up, remove adapters.
General| Type | Traditional stroller |
|---|---|
| Foldable | Yes |
| Product color | Blue |
| Number of seats | 1 seat(s) |
| Recommended age (max) | - month(s) |
| Recommended age (min) | 0 month(s) |
| Number of front wheels | 2 |
| Dimensions folded (WxDxH) | 610 x 680 x 290 mm |
Weight and Dimensions| Depth | 680 mm |
|---|---|
| Width | 610 mm |
| Height | 1050 mm |
To Next Page
