Mutsy EVO - Disassembling Rear Wheels; Assembling Front Wheels; Disassembling Front Wheels; Steering Mechanism

8
Disassemble the rear wheels (f)
· Push the button on the outside of the rear wheel and pull the wheel
from the rear wheel housing.
Assemble the front wheels (g)
· Slide the axle of the front wheel upwards in the front wheel housing
until you hear a click. Pull the wheel to check that it has been attached-
rmly.
Disassemble the front wheels (g)
· Push the button on the front side of the front wheel and pull the wheel
from the front wheel housing.
Steering
The swivelling wheels (h)
· Turn the ring above the front wheel on both sides inwards to lock the
swivelling wheels. The swivelling wheels will automatically be locked
when the wheels are placed in the driving direction.
· Turn the ring above the front wheel on both sides outwards to unlock
the swivelling wheels.
The brake (i)
· A brake pedal is available in the centre of the rear axle. Push the pedal
downwards with your foot to block the brake. Push the pedal upwards
with your foot to unblock the brake.
The push bar (c)
· Push the buttons on both sides of the push bar and turn the push bar
upwards.
· The push bar has 4 dierent height positions. Release the buttons
when the push bar is in the desired position.
The carry cot (up to 9 kg)
· The carry cot is suitable for transporting children from birth up to 9 kg
in a lying position. The carry cot is not suitable for children who can sit
or roll independently or who can raise themselves on their hands and
knees.
· You can also use the carry cot separately from the frame.
· Regularly check the bottom, the edges and the carry straps on the carry
cot for signs of wear and tear.
· Make sure that the frame has fully been unfolded and the brake blocked
during all actions indicated below.